Filaments

High quality 3D printing materials.

Fabbrix Materials

Industrial-grade materials for specific applications or basic filaments for regular purposes.
Choose the material that best suits your needs and your business field.
NYLON GF

NYLON GF

Polyamide + Glass Fiber
This material is ideal for applications where maximum stability over time and mechanical strength are required.

 
 
NYLON CARBON

NYLON CARBON

Polyamide + Carbon Fiber
This filament has a good heat and breakage resistance . Nylon gives toughness and strength, while the carbon ensures lightness and printability.

 
 
ASA

ASA

Acrylonitrile Styrene Acrylate
For applications requiring resistance to atmospheric agents and high mechanical characteristics while ensuring an excellent aesthetic finish.

 
 
ABS PRO

ABS PRO

Acrylonitrile Butadiene Styrene
Recommended for mechanical and engineering prototypes. Less odor, less warping, simpler prints.

 
 
 
SMART ABS

SMART ABS

Acrylonitrile Butadiene Styrene (improved)
It is enriched with an elastomer that allows bonding with TPU or with water-soluble PVA support.

 
 
 
 
PET

PET

PolyEthylene Terephtalate
One of the most used types of plastic in the world. Good layer adhesion, stronger than PLA.

 
 
 
PLA HT

PLA HT

Poly-Lactic Acid Compound
High temperature resistant filament, with very little shrinkage. Post-annealing process can improve the performance of the material.

transparent
 
 
CNT

CNT

Conductive (Carbon NanoTubes)
For applications that require low voltage circuits, projects with touch sensors, and the need to interact with touch screens that require low conductivity.

 
 
PLA

PLA

Poly-Lactic Acid
Recommended for design parts and architectural models.

 
transparent
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
WOOD

WOOD

Poly-Lactic Acid
A wood-filled PLA-based filament. Feels and smells like real wood.

 
 
FLEX TPU 90A

FLEX TPU 90A

Thermoplastic Polyurethane
Flexible filament for projects that demand the qualities of both rubber and plastic.

 
 
 
 
PVA

PVA

Polyvinyl Alcohol
Water soluble support material for multi-extrusion 3D printing.

transparent
 
  Suggested print temp. Suggested print speed Suggested bed temp. TDS
NYLON GF 250 - 265 °C 40 mm/s 75 °C  
NYLON CARBON 240 °C 40 mm/s 75 °C  
ASA 250 - 260 °C 40 - 70 mm/s 100 °C  
ABS PRO 245 - 265 °C 40 - 70 mm/s 90 - 110 °C (*)  
SMART ABS 240 - 250 °C 40 - 80 mm/s 90 - 110 °C (*)  
PET 210 - 230 °C 30 - 70 mm/s 75 - 85 °C  
PLA HT 220 - 260 °C 30 - 60 mm/s 60 °C  
CNT 215 °C 40 - 85 mm/s 30 - 50°C (not necessary)  
PLA 215 °C 40 - 85 mm/s 30 - 50°C (not necessary)  
WOOD 200 °C up to 25 mm/s 30 - 50°C (not necessary)  
FLEX TPU 90A 235 °C 20 mm/s 30 - 50°C (not necessary)  
PVA 200 - 220 °C 40 mm/s not required  

(*) it’s recommended to use adhesives or tape to improve adhesion to the print bed



Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok Decline