Fabbrix® ELEMENTO

Shaping the matter.

Fabbrix® Linear Technology

Fabbrix® introduces precision and high speed for movements on all 3 axes with a new linear technology control system, using Balls Bearing Screws, for the best materials deposition ever seen before.

Build Platform with Automatic Bed Leveling

With a build volume of 1000x550x500 mm, Fabbrix® ELEMENTO is designed to print huge and small industrial parts.
The aluminum/glass heated print bed allows the best first 3D printed layer thanks to a auto-leveling sensor that can precisely measure the tilt of the bed surface.

Automatic Extruder Lifting System

Direct dual super extruder moved by auto-lifting system.

Available nozzles:

0.6 mm, 0.8mm, 1 mm, 1.2 mm, 2 mm.

Open Materials System

ELEMENTO provides the best environment for printing Fabbrix® materials and third-party industrial grade materials like PPS, SMART ABS, PLA HT, PET, ASA, BVOH, NYLON CARBON, NYLON GF.

Technical Specifications

3D printer model Fabbrix® ELEMENTO (V2)
Technology FFF (Fused Filament Fabrication)
Printhead Double direct extruder with automatic nozzle lifting system
Filament diameter 2.85 mm
Layer resolution 0.6 mm nozzle: 300 - 100 micron
0.8 mm nozzle: 400 - 150 micron
1 mm nozzle: 500 - 300 micron
1.2 mm nozzle: 600 - 350 micron
2 mm nozzle: 1000 - 600 micron
XYZ resolution 5 - 5 - 2.5 micron
Build volume 1000x550x500 mm
Build speed 150 mm/s
Build plate Heated aluminum/glass build plate
Build plate temperature 20 - 80 °C
Build plate leveling Active leveling
Nozzle diameter 0.6 mm, 0.8 mm, 1 mm, 1.2 mm, 2 mm
Nozzle temperature 180 - 300 °C
Connectivity Wi-Fi, LAN, USB port
Interface Touchscreen Display + Fail Safe
Supported materials Fabbrix® materials, third-party materials